REC

ビデオ撮影、制作、ビデオ編集、および機器のメンテナンスに関するヒント。

 WTVID >> ビデオ >  >> 撮影機材 >> 撮影機材

新しい GoPro Hero のセットアップ方法

各 GoPro Hero モデルは、アクション カメラ フォーマットに新しいものをもたらし、最後の機能と能力を構築します。 GoPro カメラの主な目的は、アクションをそのままキャプチャすることです。そのため、ほとんどのユーザーと同様に、カメラを手に取り、まっすぐに撮影したい場合は、GoPro が最適です。

GoPro Hero は、最小限の手間で見事な映像を撮影できるように設計されています。ただし、単に録画するだけでなく、より多くのオプションが必要な場合は、GoPro Hero Black に高品質の高度な設定が含まれているため、このカメラは放送業界で人気があります.

2016 年後半、GoPro は 2 台のカメラでこれまで以上に範囲を簡素化しました。 GoPro Hero5 Black と GoPro Hero5 Session はどちらも Photokina 2016 で発表されました。どちらのデザインも、これまで以上に使いやすくなっています。もう少し詳しく知りたい場合は、最初の印象と最新の Hero5 Black と Hero4 の比較をご覧ください。黒。

新しいモデルには多くの変更点があり、カメラが発売されたらすぐにそれらを見ていきます.ここでは、Hero4 シリーズと、Hero、Hero4 Silver、および Hero4 Black に共通するいくつかの機能と設定を見ていきます。

もっと見る: GoPro Hero とアクション カメラの決定版スターター ガイド

GoPro Hero の防水ハウジングの取り外し

カメラが到着すると、各 GoPro は防水ハウジングで保護されます。 GoPro のシルバー バージョンとブラック バージョンでは、カメラを充電したり、メモリ カードをテレビに挿入または接続したりするには、ハウジングを取り外す必要があります。

防水ハウジングは圧縮クリップで閉じて保持され、簡単に開くことができます。カメラのシルバー バージョンとブラック バージョンの場合、開口部を下に向けてハウジングを裏返し、下を手で軽くたたくと、カメラが外れます。

ヒーローはベース レベルのカメラで、防水ハウジングが所定の位置に固定されています。背面を外すと、USB および MicroSD カード スロットに直接アクセスできます。

すべてのカメラで、ケースを再度閉じる際には、シールにほこりや布が付着していないことを確認してください。このシールを妨げるものは、ケースの防水品質に影響を与え、クランプで閉じます。

もっと見る: アクション カメラをもっと活用するための GoPro Hero の 5 つの簡単なヒント

バッテリーの充電

GoPro には USB (USB マイクロ) 経由でバッテリー充電器が内蔵されており、GoPro の側面に直接差し込むだけです。そして、お好みの充電器に。壁に直接差し込む USB プラグを使用できる場合、これはほぼ確実に 1 アンペアではなく 2 アンペアの接続になります。つまり、GoPro の充電がはるかに速くなります。

The GoPro Hero has the USB port positioned on the back of the camera.

Storage

All GoPro’s take a form of memory card called a MicroSD card. These small cards are commonly used in mobile devises and range in capacities from 1GB to 512GB although larger capacity MicroSD cards are being announced.

When it comes to buying one for your GoPro there are a few important factors that you should look out for. Unlike a mobile phone or tablet where the READ SPEED of a card is important in order to watch back movies or listen to music, when it comes to the GoPro it’s the WRITE SPEED that is the most important figure. This is due to you using the card primarily to record high definition video footage to the card.

When you start to look around you’ll see the many cards will quote big numbers such as 95mb/s on the packaging, unfortunately this will often refer to the write speed, flip the package over and have a close look at the details, you’re looking for a write speed of at least 50mb/s but the higher the better, if there’s no write speed quoted then you know that the card will probably not be suitable for your GoPro.

The card should also be a minimum of class 10, you’ll see this on the packaging and printed on the card. Class 10 simply means that the card has a minimum transfer rate of 10 MB/s.

There is another marking that shows just how fast the card is, and this usually looks like a U with a number in, normally 1 or 3. If it has this but no class rating then it’s safe to use the card in your GoPro. The marking shows that the card is UHS Class. UHS Class 1 means that it also has a minimum transfer rate of 10 MB/s, more common for the latest batch of cards is UHS Class 3, this has a minimum transfer rate of 30MB/s.

You’ll also need quite a high capacity card and here anything from 16GB up will do, the size will really be dictated by the resolution and length of footage that you shoot.

SEE MORE: The best Official GoPro accessories

Switching on

Power up your GoPro using the large button on the front of the camera, this as with all buttons can be operated through the casing. Hold the power button down and hold for a couple of seconds to switch the camera on, then to switch off hold down again to power down.

Select your mode

The power button has two uses; Power on and off when held down for a few second, or once the camera is switched on you can toggle through the different modes, video, photo, burst, time-lapse and settings by quickly pushing the button. On the Hero it’s all quite straight forward tap the power button to mode you want and it will be selected, the small LCD on the front will also highlight which mode you are in.

Start recording

It doesn’t matter if the power is on or off , you can start the GoPro recording by pushing the button on top. One push to start and another to stop. A red light will flash on the front to let you know that it’s recording and if you look at the LCD screen you’ll see the duration that you’re recording.

Buy the GoPro HERO4 BLACK at Amazon

Buy the GoPro HERO4 SILVER at Amazon

Save


  1. iPhoneカメラでタイマーを設定する方法

  2. 新しいスキルセットで古い画像を編集する方法

  3. Wifi で GoPro Hero に接続

  4. GoPro Hero ビデオをダウンロードして整理する

  5. GoPro ヒーローを取り付けるさまざまな方法

  6. カメラで手動でホワイト バランスを設定する方法

  7. GoPro Hero で露出ロックを使用する方法

  8. GoPro Hero でライブ ストリーミングする方法

  1. 都市景観を撮影するためのカメラの設定方法

  2. GoPro Hero 6 Black Touch Zoom の使用方法

  3. GoPro Fusion のセットアップ方法

  4. 設定方法

  5. 連続撮影モード:カメラでバースト撮影を設定する方法

  6. 初めて GoPro Max をセットアップする方法

  7. 初めて GoPro カメラをセットアップする方法

  8. GoPro クリスマスのやり方

撮影機材